--- Output Select
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the device driver and the device window for a Aten VGA Splitter with up to 8-outputs (Models VS0102, VS0104 and VS0108). The driver doesn´t support switching of cascaded VGA Splitters. It allows to switch on/off, mute and reset each output independently.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- Output Select --- The faults page. --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
The Aten VGA Splitter do not need any configuration parameters except the settings for the serial interface
| parameter | description |
|---|---|
| Serial | Remember to set the line parameters for the serial interface connected to the device. The recommended line setting for the use with the sat-nms software is 19200,N,8,1 . |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.model | TEXT | R/O | StringRange R/O |
| info.release | TEXT | R/O | StringRange R/O |
| config.readBackDelay | INTEGER | SAVE SETUP | IntegerRange (100 .. 10000) |
| output.01.video | CHOICE | EnumRange (ON OFF) | |
| output.01.audio | CHOICE | EnumRange (ON OFF) | |
| output.01.monitor | CHOICE | R/O | EnumRange R/O (true false) |
| output.01.reset | TEXT | NOPRESET | StringRange |
| output.02.video | CHOICE | EnumRange (ON OFF) | |
| output.02.audio | CHOICE | EnumRange (ON OFF) | |
| output.02.monitor | CHOICE | R/O | EnumRange R/O (true false) |
| output.02.reset | TEXT | NOPRESET | StringRange |
| output.03.video | CHOICE | EnumRange DIS (OFF ON) | |
| output.03.audio | CHOICE | EnumRange DIS (OFF ON) | |
| output.03.monitor | CHOICE | R/O | EnumRange R/O DIS (false true) |
| output.03.reset | TEXT | NOPRESET | StringRange DIS |
| output.04.video | CHOICE | EnumRange DIS (ON OFF) | |
| output.04.audio | CHOICE | EnumRange DIS (ON OFF) | |
| output.04.monitor | CHOICE | R/O | EnumRange R/O DIS (true false) |
| output.04.reset | TEXT | NOPRESET | StringRange DIS |
| output.05.video | CHOICE | EnumRange DIS (ON OFF) | |
| output.05.audio | CHOICE | EnumRange DIS (ON OFF) | |
| output.05.monitor | CHOICE | R/O | EnumRange R/O DIS (true false) |
| output.05.reset | TEXT | NOPRESET | StringRange DIS |
| output.06.video | CHOICE | EnumRange DIS (ON OFF) | |
| output.06.audio | CHOICE | EnumRange DIS (ON OFF) | |
| output.06.monitor | CHOICE | R/O | EnumRange R/O DIS (true false) |
| output.06.reset | TEXT | NOPRESET | StringRange DIS |
| output.07.video | CHOICE | EnumRange DIS (ON OFF) | |
| output.07.audio | CHOICE | EnumRange DIS (ON OFF) | |
| output.07.monitor | CHOICE | R/O | EnumRange R/O DIS (true false) |
| output.07.reset | TEXT | NOPRESET | StringRange DIS |
| output.08.video | CHOICE | EnumRange DIS (ON OFF) | |
| output.08.audio | CHOICE | EnumRange DIS (ON OFF) | |
| output.08.monitor | CHOICE | R/O | EnumRange R/O DIS (true false) |
| output.08.reset | TEXT | NOPRESET | StringRange DIS |
| edid | CHOICE | EnumRange (AUTO PORT 1 DEFAULT) | |
| reset | TEXT | NOPRESET | StringRange |
| outputs.video | CHOICE | EnumRange (ON OFF) | |
| outputs.audio | CHOICE | EnumRange (ON OFF) |