--- The measurement values and device states.
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the monitoring only device driver and the device window for the Dantherm Combo Cooling 10000/1000 air conditioning controller device using Modbus protocol.
Device window pages
The following table shows which device window pages are available with this individual device type.
--- The measurement values and device states. --- The faults page. --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the device.
| parameter | description |
|---|---|
| address | The device address (decimal) as set at the device's front panel. |
| Serial | Remember to set the line parameters for the serial interface |
The Dantherm unit is controlled through Modbus/TCP. The device IP address must be set as an interface name like with serial devices controlled through a network terminal adapter: "aaa.bbb.ccc.ddd:502" where 502 is the standard Modbus/TCP port number.
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.version | TEXT | R/O | StringRange R/O |
| info.product | TEXT | R/O | StringRange R/O |
| fan.1.speed | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| fan.2.speed | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| fan.3.speed | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| fan.1.drive | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| fan.2.drive | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| fan.3.drive | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| room.temperature | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| ambient.temperature | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| supply.temperature | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| condensor.temperature | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| board.temperature | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| supply.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| system.state | TEXT | R/O | StringRange R/O |
| fan.1.state | TEXT | R/O | StringRange R/O |
| fan.2.state | TEXT | R/O | StringRange R/O |
| fan.3.state | TEXT | R/O | StringRange R/O |
| damper.1.state | TEXT | R/O | StringRange R/O |
| damper.2.state | TEXT | R/O | StringRange R/O |
| compr.state | TEXT | R/O | StringRange R/O |
| ac.1.state | TEXT | R/O | StringRange R/O |
| ac.2.state | TEXT | R/O | StringRange R/O |
| heater.state | TEXT | R/O | StringRange R/O |
| damper.1.position | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| damper.2.position | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Alarm 1) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Alarm 2) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Low voltage) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Temp limit) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Fan 1) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Fan 2) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (Fan 3) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (Onboard sensor) |
| faults.09 | ALARM | R/O | AlarmFlagRange R/O (Room sensor) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (Ambient sensor) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (Supply sensor) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (Condensor sensor) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (Digital 1) |
| faults.14 | ALARM | R/O | AlarmFlagRange R/O (Digital 2) |
| faults.15 | ALARM | R/O | AlarmFlagRange R/O (Door switch) |
| faults.16 | ALARM | R/O | AlarmFlagRange R/O (Filter inout) |
| faults.17 | ALARM | R/O | AlarmFlagRange R/O (Phase monitor) |