--- The operational parametersThis page describes the device driver and the device window for the Miteq Uplink Power Control Unit.
Device window pages
The following table shows which device window pages are available with this individual device type.
--- The operational parametersConfiguration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the unit.
| parameter | description |
|---|---|
| address | The device address (decimal) as set at the device's front panel. |
| channels | number of enabled channels |
| Serial | Remember to set the line parameters for the serial interface |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.version | TEXT | R/O | StringRange R/O |
| config.readBackDelay | INTEGER | SAVE SETUP | IntegerRange (100 .. 10000) |
| config.channels | INTEGER | SAVE SETUP | IntegerRange (1 .. 10) |
| algorithm | CHOICE | EnumRange (OPEN-LOOP CLOSED-LOOP COMPARISION DUAL-TRACK DIVERSITY-SWITCHING) | |
| sampleTime | FLOAT | DoubleRange (0.2 .. 10.0) | |
| input.a | CHOICE | EnumRange (OFF STANDBY ACTIVE) | |
| input.b | CHOICE | EnumRange (OFF STANDBY ACTIVE) | |
| inputPower.a | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| inputPower.b | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| activeInput | CHOICE | EnumRange (NONE A B A+B) | |
| channel.01 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.02 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.03 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.04 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.05 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.06 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.07 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.08 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.09 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| channel.10 | CHOICE | EnumRange DIS (OFF MANUAL AUTO) | |
| clearSkyAttn.01 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.02 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.03 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.04 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.05 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.06 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.07 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.08 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.09 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| clearSkyAttn.10 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.01 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.02 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.03 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.04 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.05 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.06 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.07 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.08 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.09 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| attn.10 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.01 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.02 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.03 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.04 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.05 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.06 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.07 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.08 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.09 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| maxStepSize.10 | FLOAT | DoubleRange DIS (0.0 .. 20.0) | |
| upcMax.01 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.02 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.03 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.04 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.05 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.06 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.07 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.08 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.09 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| upcMax.10 | BOOLEAN | R/O | BooleanRange R/O DIS (true false) |
| internal.inA | TEXT | R/O | StringRange R/O |
| internal.inB | TEXT | R/O | StringRange R/O |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Channel 01) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Channel 02) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Channel 03) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Channel 04) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Channel 05) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Channel 06) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (Channel 07) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (Channel 08) |
| faults.09 | ALARM | R/O | AlarmFlagRange R/O (Channel 09) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (Channel 10) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (Receiver A) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (Receiver B) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (Power supply A) |
| faults.14 | ALARM | R/O | AlarmFlagRange R/O (Power supply B) |
| faults.15 | ALARM | R/O | AlarmFlagRange R/O (Remote Access) |
| faults.16 | ALARM | R/O | AlarmFlagRange R/O (Summary) |