The NAIS-FP-AD4-2Channel driver accesses the data read two analog channels of an AD4 (CH0 and CH1) in the voltage range of -10V..+10V
It requires the following mode switch settings
It was tested with: Panasonic FP0R-AD4 for general usage.
There is no further online help for this type of device. Please refer to the general description of device windows instead.
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| channel.0 | FLOAT | R/O | DoubleRange R/O (0.000 .. 0.000) |
| channel.1 | FLOAT | R/O | DoubleRange R/O (0.000 .. 0.000) |
| internal.ch0 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| internal.ch1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |