--- Channel Select
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the device driver and the device window for a Novotronik L-Band Matrix with up to 8 inputs and outputs.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- Channel Select --- The faults page. --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
The Novotronik Matrix do not need any configuration parameters except the settings for the serial interface
| parameter | description |
|---|---|
| Serial | Remember to set the line parameters for the serial interface connected to the device. The recommended line setting for the use with the sat-nms software is 19200,N,8,1 . |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.swversion | TEXT | R/O | StringRange R/O |
| output.01 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.02 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.03 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.04 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.05 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.06 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.07 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| output.08 | CHOICE | EnumRange (00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16) | |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Battery status) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Manual ctrl board) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Switch board 01) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Switch board 02) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Switch board 03) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Switch board 04) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (Switch board 05) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (Switch board 06) |
| faults.09 | ALARM | R/O | AlarmFlagRange R/O (Switch board 07) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (Switch board 08) |
| reset | TEXT | NOPRESET | StringRange |
| internal.manual | TEXT | R/O | StringRange R/O |
| internal.board | TEXT | R/O | StringRange R/O |
| internal.modules | TEXT | R/O | StringRange R/O |
| internal.power | TEXT | R/O | StringRange R/O |