--- Device settings and status.
--- The faults page.
--- The device info page.
--- The maintenance page.This page describes the device driver and the device window for the Novus NR2110-OG Single Channel GPS Locked OCXO Frequency Reference via SNMP.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- Device settings and status. --- The faults page. --- The device info page. --- The maintenance page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the device.
| parameter | description |
|---|---|
| readBackDelay | Defines the delay the driver uses when it reads back parameters recently commanded. The delay is initialized at a proved preset value which should not be changed under normal circumstances. |
| channels | Defines the number of output channels (1..8). |
| antennas | Defines the number of GPS antennas connected (1..2). |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| config.channels | INTEGER | SAVE SETUP | IntegerRange (1 .. 8) |
| config.antennas | INTEGER | SAVE SETUP | IntegerRange (1 .. 2) |
| gps1Lock | BOOLEAN | R/O | BooleanRange R/O (true false) |
| gps2Lock | BOOLEAN | R/O | BooleanRange R/O (true false) |
| gps1Satellites | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| gps2Satellites | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| channel1Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel2Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel3Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel4Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel5Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel6Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel7Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| channel8Vpp | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| psu5Vpos | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| psu5Vneg | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| psuOCXO | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| temperature | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| faultThreshold | FLOAT | DoubleRange (0.05 .. 0.95) | |
| latchAvg | TEXT | NOPRESET | StringRange |
| internal.cflts | HEX | R/O | HexRange R/O (0 .. 0) |
| internal.pflts | HEX | R/O | HexRange R/O (0 .. 0) |
| internal.dummy | TEXT | R/O | StringRange R/O |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Channel 1) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Channel 2) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Channel 3) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Channel 4) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Channel 5) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Channel 6) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (Channel 7) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (Channel 8) |
| faults.09 | ALARM | R/O | AlarmFlagRange R/O (Antenna A) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (Antenna B) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (PSU -5V) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (PSU +5V) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (PSU OCXO) |