--- RF / modulator parameters
--- Encoding / encryption parameters
--- Device fault list
--- The faults page.
--- The device info page.
--- The maintenance page.This page describes the device driver and the device window for the Scopus UE9000 MPEG video encoder family. The sat-nms device driver for the UE9000 encoders only implements a minimal set of parameters (mostly the modulator settings and a small number of encoding settings). The device window gives access to the encoder's web browser remote control through a button. A click to the button launches the web browser where you can control all settings of the encoder.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- RF / modulator parameters --- Encoding / encryption parameters --- Device fault list --- The faults page. --- The device info page. --- The maintenance page.Configuration parameters
The only parameter which must be set at the maintenance page of the device window is the encoder#s address:
| parameter | description |
|---|---|
| address | Enter the IP address of the encoder here, followed by the community string 'private'. Example: |
| 10.0.0.1 private |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.model | TEXT | R/O | StringRange R/O |
| info.swrelease | TEXT | R/O | StringRange R/O |
| info.fwrelease | TEXT | R/O | StringRange R/O |
| info.hwrelease | TEXT | R/O | StringRange R/O |
| info.serialno | TEXT | R/O | StringRange R/O |
| info.signal.on | CHOICE | R/O | EnumRange R/O (OFF ON) |
| config.readBackDelay | INTEGER | SAVE SETUP | IntegerRange (100 .. 10000) |
| config.bucPower | CHOICE | SETUP | EnumRange (OFF ON) |
| config.bucReference | CHOICE | SETUP | EnumRange (OFF ON) |
| x.vid1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.vid2 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.aud1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.aud2 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.aud3 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.aud4 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.asii | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.vst1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.vst2 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.ast1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.ast2 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.ast3 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.ast4 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.vbi1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.vbi2 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.asis | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.tstr | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.lmod | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| x.srvc | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| internal.saveSettings | TEXT | R/O | StringRange R/O |
| internal.saveTimer | TEXT | R/O | StringRange R/O |
| internal.acodec.1 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| internal.acodec.2 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| internal.acodec.3 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| internal.acodec.4 | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| internal.rfon | CHOICE | R/O | EnumRange R/O (OFF ON) |
| internal.type | TEXT | R/O | StringRange R/O |
| output.program | INTEGER | IntegerRange (1 .. 65535) | |
| output.service | TEXT | StringRange | |
| mod.frequency | FLOAT | DoubleRange (0.000 .. 0.000) | |
| mod.rfon | CHOICE | EnumRange (OFF ON) | |
| mod.power | FLOAT | DoubleRange (0 .. 0) | |
| mod.modulation | CHOICE | EnumRange (OFF ON) | |
| mod.type | CHOICE | EnumRange (DVB-S DVB-S2) | |
| mod.fec | CHOICE | EnumRange (QPSK-NO-FEC QPSK-1/2 QPSK-2/3 QPSK-3/4 QPSK-5/6 QPSK-6/7 QPSK-7/8 QPSK-1/4 QPSK-1/3 QPSK-2/5 QPSK-3/5 QPSK-4/5 QPSK-8/9 QPSK-9/10 APSK16-2/3 APSK16-3/4 APSK16-4/5 APSK16-5/6 APSK16-8/9 APSK16-9/10 16QAM-3/4 16QAM-7/8 8PSK-3/5 8PSK-2/3 8PSK-3/4 8PSK-5/6 8PSK-8/9 8PSK-9/10) | |
| mod.modulation2 | CHOICE | EnumRange (QPSK 16APSK 16QAM 8PSK) | |
| mod.fec2 | CHOICE | EnumRange (1/2 1/3 1/4 2/3 2/5 3/4 3/5 4/5 5/6 6/7 7/8 8/9 9/10 N/A) | |
| mod.symbolrate | FLOAT | DoubleRange (0.00000 .. 0.00000) | |
| mod.spectrum | CHOICE | EnumRange (NORM INVERT) | |
| mod.rollOff | CHOICE | EnumRange (0.35 0.25 0.20) | |
| mod.pilot | CHOICE | EnumRange (OFF ON) | |
| video.aspect | CHOICE | EnumRange (4:3 16:9 4:3-AUTO 16:9-AUTO) | |
| audio.1.avdelay | INTEGER | IntegerRange (-300 .. 300) | |
| audio.2.avdelay | INTEGER | IntegerRange (-300 .. 300) | |
| audio.3.avdelay | INTEGER | IntegerRange (-300 .. 300) | |
| audio.4.avdelay | INTEGER | IntegerRange (-300 .. 300) | |
| ca.type | CHOICE | EnumRange (CLEAR BISS-1 BISS-E-BURIED BISS-E-INJECTED) | |
| ca.injected | TEXT | StringRange | |
| ca.clearsw | TEXT | StringRange | |
| ca.cryptedsw | TEXT | StringRange | |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Encoder) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Video 1) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Video 2) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Audio 1) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Audio 2) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Audio 3) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (Audio 4) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (Modulator) |
| faultList | TEXT | R/O | StringRange R/O |