--- Shows the stored float value.
--- The device info page.
--- The maintenance page. The configuration parameters from this page are described below.The logical Store-Float device is a dummy device driver which stores a Float variable when triggered externally. It�s value can be used e.g. as input parameter to trigger an Replicator device to make sure that Replication is only forwarded in one direction.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- Shows the stored float value. --- The device info page. --- The maintenance page. The configuration parameters from this page are described below.Configuration parameters
The device does not contain any configuration parameters.
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| value | FLOAT | DoubleRange (0.000 .. 0.000) |