--- The operational parameters and meter readings
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the device driver and the device window for the Zodiac-Cortex-Reset device.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- The operational parameters and meter readings --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the Amplifier.
| parameter | description |
|---|---|
| address | The IP address of the Zodiac Cortex Reset to connect. |
| portNumber | The IP port number used to command the device. This typically is 3002. |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| config.portNumber | INTEGER | SAVE SETUP | IntegerRange (0 .. 65535) |
| reset | TEXT | NOPRESET | StringRange |