User Manual

8.5.56 TargetListElement

The TargetListElement embeds the list of targets of a SatService-ACU-ODM antenna controller in the screen. Targets may be recalled (which moves the antenna to the stored position and sets the tracking parameters associated with this target), saved or deleted.

Data Model (extends ScreenElement)

Key	Type	Value
type	String	Always "TargetListElement".
xpos	Number	see ScreenElement
ypos	Number	see ScreenElement
width	Number	see ScreenElement
height	Number	see ScreenElement
id	String	The device name of the SatService-ACU-ODM. In device screens the id has to be interpreted differently, see below.
privilege	Number	The privilege level required to show details about the device and to change the device's operating state.
enableId	String	The enable ID (may be empty)
enableValue	String	The value which must be matched to enable the field

Device Name Indirection

The id parameter is interpreted differently depending on the context where the ODM Target List screen element resides:

When placed in a user defined screen or in the main screen of the application, id is the name of the ODM device it shall refer to.
When placed in the device screen of another device which defines a configuration variable with the antenna controller's device name, id is the name of this configuration variable and the name of the ODM device is derived from the content of this variable.
Finally, when used in the device screen of the ODM device itself, id is '@'.

Target List Parsing

The target list element gets its information from a parameter 'target.list' the ODM device provides for this purpose. This variable contains the target list as a one line string with the target definitions appearing at fixed character positions.

Each target definition contains the target name and the azimuth / elevation / polarization angles. The target number is defined implicitly from the position of the target in the complete string. The format of each target definition is as follows:

target name (azimuth/elevation/polarization)

This string is padded with spaces to 45 characters length. With target numbers starting at 0, you can access a particular target in the string at position n*45 with a length of 45 characters.