--- The operational parametersThis page describes the device driver and the device window for the Apollo Microwave Waveguide Switching and HPA Protection system tested with 3 waveguide switches and 3+1 HPA redundancy
Device window pages
The following table shows which device window pages are available with this individual device type.
--- The operational parametersConfiguration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the unit.
| parameter | description |
|---|---|
| address | The device address (decimal) as set at the device's front panel. |
| Serial | Remember to set the line parameters for the serial interface |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.model | TEXT | R/O | StringRange R/O |
| info.revision | TEXT | R/O | StringRange R/O |
| config.readBackDelay | INTEGER | SAVE SETUP | IntegerRange (100 .. 10000) |
| protection | CHOICE | EnumRange (MANUAL AUTO) | |
| reset | TEXT | NOPRESET | StringRange |
| switch.01 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.02 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.03 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.04 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.05 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.06 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.07 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.08 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.09 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.10 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.11 | CHOICE | EnumRange DIS (FLT A B) | |
| switch.12 | CHOICE | EnumRange DIS (FLT A B) | |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Remote access) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Ext. interlock) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Unknown model) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (HPA 1) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (HPA 2) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (HPA 3) |
| faults.14 | ALARM | R/O | AlarmFlagRange R/O (HPA 4) |
| faults.15 | ALARM | R/O | AlarmFlagRange R/O (HPA 5) |
| faults.16 | ALARM | R/O | AlarmFlagRange R/O (HPA 6) |
| faults.21 | ALARM | R/O | AlarmFlagRange R/O (Switch 1) |
| faults.22 | ALARM | R/O | AlarmFlagRange R/O (Switch 2) |
| faults.23 | ALARM | R/O | AlarmFlagRange R/O (Switch 3) |
| faults.24 | ALARM | R/O | AlarmFlagRange R/O (Switch 4) |
| faults.25 | ALARM | R/O | AlarmFlagRange R/O (Switch 5) |
| faults.26 | ALARM | R/O | AlarmFlagRange R/O (Switch 6) |
| faults.27 | ALARM | R/O | AlarmFlagRange R/O (Switch 7) |
| faults.28 | ALARM | R/O | AlarmFlagRange R/O (Switch 8) |
| faults.29 | ALARM | R/O | AlarmFlagRange R/O (Switch 9) |
| faults.30 | ALARM | R/O | AlarmFlagRange R/O (Switch 10) |
| faults.31 | ALARM | R/O | AlarmFlagRange R/O (Switch 11) |
| faults.32 | ALARM | R/O | AlarmFlagRange R/O (Switch 12) |