--- The I/O controller parameters and sensor measurements
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the SNMP based readonly device driver for the 2773-XXYY Series LNB Tone switching and DC power supply from ETL Systems.
The driver was tested with the following model:
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- The I/O controller parameters and sensor measurements --- The faults page. --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the amplifier.
| parameter | description |
|---|---|
| address | The SNMP address specification for the device (details below). |
| moduleName 01...16 | Defines the module alias name stored only locally on the M&C. |
SNMP address specification
The full address consists of the following fields: aaa.bbb.ccc.ddd:pppp read-community write-community
| parameter | description |
|---|---|
| aaa.bbb.ccc.ddd | The IP address of the device in 'dotted quad' notation. This field is mandatory. |
| pppp | The IP port number where the device accepts SNMP requests. The port number may be omitted, the driver uses the standard port 161 in this case. |
| read-community | The SNMP read community name. This must match the read community expected by the device. |
| write-community | The SNMP write community name. This must match the write community expected by the device. The write community name may be omitted, the driver uses the read community name for both, read and write in this case. If both community names are missing, the driver uses public and private as a default for read and write community. |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.version | TEXT | R/O | StringRange R/O |
| config.module.01.name | TEXT | SAVE SETUP | StringRange |
| config.module.02.name | TEXT | SAVE SETUP | StringRange |
| config.module.03.name | TEXT | SAVE SETUP | StringRange |
| config.module.04.name | TEXT | SAVE SETUP | StringRange |
| config.module.05.name | TEXT | SAVE SETUP | StringRange |
| config.module.06.name | TEXT | SAVE SETUP | StringRange |
| config.module.07.name | TEXT | SAVE SETUP | StringRange |
| config.module.08.name | TEXT | SAVE SETUP | StringRange |
| config.module.09.name | TEXT | SAVE SETUP | StringRange |
| config.module.10.name | TEXT | SAVE SETUP | StringRange |
| config.module.11.name | TEXT | SAVE SETUP | StringRange |
| config.module.12.name | TEXT | SAVE SETUP | StringRange |
| config.module.13.name | TEXT | SAVE SETUP | StringRange |
| config.module.14.name | TEXT | SAVE SETUP | StringRange |
| config.module.15.name | TEXT | SAVE SETUP | StringRange |
| config.module.16.name | TEXT | SAVE SETUP | StringRange |
| config.deviceComment | TEXT | SAVE SETUP | StringRange |
| module.01.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.02.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.03.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.04.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.05.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.06.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.07.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.08.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.09.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.10.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.11.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.12.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.13.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.14.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.15.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.16.meas.voltage | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| module.01.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.02.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.03.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.04.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.05.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.06.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.07.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.08.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.09.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.10.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.11.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.12.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.13.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.14.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.15.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| module.16.meas.current | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| setMonitoring | TEXT | NOPRESET | StringRange |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Module 1 Low Current) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Module 1 High Current) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Module 2 Low Current) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Module 2 High Current) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Module 3 Low Current) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Module 3 High Current) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (Module 4 Low Current) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (Module 4 High Current) |
| faults.09 | ALARM | R/O | AlarmFlagRange R/O (Module 5 Low Current) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (Module 5 High Current) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (Module 6 Low Current) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (Module 6 High Current) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (Module 7 Low Current) |
| faults.14 | ALARM | R/O | AlarmFlagRange R/O (Module 7 High Current) |
| faults.15 | ALARM | R/O | AlarmFlagRange R/O (Module 8 Low Current) |
| faults.16 | ALARM | R/O | AlarmFlagRange R/O (Module 8 High Current) |
| faults.17 | ALARM | R/O | AlarmFlagRange R/O (Module 9 Low Current) |
| faults.18 | ALARM | R/O | AlarmFlagRange R/O (Module 9 High Current) |
| faults.19 | ALARM | R/O | AlarmFlagRange R/O (Module 10 Low Current) |
| faults.20 | ALARM | R/O | AlarmFlagRange R/O (Module 10 High Current) |
| faults.21 | ALARM | R/O | AlarmFlagRange R/O (Module 11 Low Current) |
| faults.22 | ALARM | R/O | AlarmFlagRange R/O (Module 11 High Current) |
| faults.23 | ALARM | R/O | AlarmFlagRange R/O (Module 12 Low Current) |
| faults.24 | ALARM | R/O | AlarmFlagRange R/O (Module 12 High Current) |
| faults.25 | ALARM | R/O | AlarmFlagRange R/O (Module 13 Low Current) |
| faults.26 | ALARM | R/O | AlarmFlagRange R/O (Module 13 High Current) |
| faults.27 | ALARM | R/O | AlarmFlagRange R/O (Module 14 Low Current) |
| faults.28 | ALARM | R/O | AlarmFlagRange R/O (Module 14 High Current) |
| faults.29 | ALARM | R/O | AlarmFlagRange R/O (Module 15 Low Current) |
| faults.30 | ALARM | R/O | AlarmFlagRange R/O (Module 15 High Current) |
| faults.31 | ALARM | R/O | AlarmFlagRange R/O (Module 16 Low Current) |
| faults.32 | ALARM | R/O | AlarmFlagRange R/O (Module 16 High Current) |