--- Channel Select
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the device driver and the device window for a Leitch ASI Switch Matrix (Panacea series) with up to 8 inputs and outputs. The driver supports only interfaces on Level 0.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- Channel Select --- The faults page. --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
The Matrix do not need any configuration parameters except the settings for the serial interface
| parameter | description |
|---|---|
| Serial | Remember to set the line parameters for the serial interface connected to the device. The recommended line setting for the use with the sat-nms software is 9600,N,8,1 . |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.swversion | TEXT | R/O | StringRange R/O |
| info.bootloader | TEXT | R/O | StringRange R/O |
| info.module | TEXT | R/O | StringRange R/O |
| info.cntr.serial | TEXT | R/O | StringRange R/O |
| info.inf.serial | TEXT | R/O | StringRange R/O |
| output.01 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.02 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.03 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.04 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.05 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.06 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.07 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| output.08 | CHOICE | EnumRange (0001 0002 0003 0004 0005 0006 0007 0008) | |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Fan) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Power Supply 1) |
| reset | TEXT | StringRange | |
| internal.manual | TEXT | R/O | StringRange R/O |
| internal.board | TEXT | R/O | StringRange R/O |
| internal.modules | TEXT | R/O | StringRange R/O |
| internal.power | TEXT | R/O | StringRange R/O |