9.484 Novotronik-GTS5852

This page describes the device driver and the device window for a Novotronik 8x1 Switch from type GTS5852.

The switch has 8 inputs, possible position setting values are 0,1,2...8, position 0 means that no input is connected to the output and all ports are terminated with proper matching impedances.

Device window pages

The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .

• --- Channel Select
• --- The faults page.
• --- The device info page.
• --- The maintenance page. The configuration parameters described below are set at this page.

Configuration parameters

The GTS5852 do not need any configuration parameters except the settings for IP address and SNMP communities

• parameter --- description
• address --- The SNMP address specification for the device. The full address specification consists of the following fields:aaa.bbb.ccc.ddd:pppp read-community write-community
  • aaa.bbb.ccc.ddd --- The IP address of the device in 'dotted quad' notation. This field is mandatory.
  • pppp --- The IP port number where the device accepts SNMP requests. The port number may be omitted, the driver uses the standard port 161 in this case.
  • read-community --- The SNMP read community name. This must match the read community expected by the device.
  • write-community --- The SNMP write community name. This must match the write community expected by the device. The write community name may be omitted, the driver uses the read community name for both, read and write in this case. If both community names are missing, the driver uses 'public' as a default for read and write community.

The read/write-community strings may be set through the web interface of the device. Factory defaults are 'public' for the read community, 'private' for the write community. Hence a typical address specification for may be 10.0.0.1 public private .

Variables defined by this device driver