--- RF / modulator parameters
--- Device fault list messages
--- The faults page.
--- The device info page.
--- The maintenance page.This page describes the device driver and the device window for the Tandberg SM62XX DVB modulator family.
It was tested with the SM 6620 SW 04.17.
It supports also SM6610, SM6615 and 6625. Therefore the model can be adapted using the config.model setup parameter
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- RF / modulator parameters --- Device fault list messages --- The faults page. --- The device info page. --- The maintenance page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the encoder.
| parameter | description |
|---|---|
| address | Enter the IP address of the encoder here, followed by the community string 'private'. Example: 10.0.0.1 private |
| frontPanel | Switches front panel between full control and monitor only |
| freqMode | Switches between usage of IF and RF frequency |
| model | Allows to select the appropriate model |
| deviceComment | An optional text entered here appears as an addition to the tooltip which is shown while the mouse is placed over a device icon in the GUI. The "\n" character sequence is translated into a newline character, splitting the text into multiple lines. |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.model | TEXT | R/O | StringRange R/O |
| info.swrelease | TEXT | R/O | StringRange R/O |
| info.serialno | TEXT | R/O | StringRange R/O |
| info.signal.on | CHOICE | R/O | EnumRange R/O (OFF ON) |
| config.readBackDelay | INTEGER | SAVE SETUP | IntegerRange (100 .. 10000) |
| config.frontPanel | CHOICE | SETUP | EnumRange (FULL MONITOR) |
| config.freqMode | CHOICE | SAVE SETUP | EnumRange (IF RF) |
| config.model | CHOICE | SAVE SETUP | EnumRange (SM6610 SM6615 SM6620 SM6625) |
| config.deviceComment | TEXT | SAVE SETUP | StringRange |
| input.source | CHOICE | EnumRange (ASI-1 ASI-2 SPI NULL PRBS ASI-3 ASI-4) | |
| input.packetsize | CHOICE | EnumRange (188 204 UNFRAMED) | |
| input.datarate | FLOAT | DoubleRange (0.711130 .. 213.000000) | |
| mod.power | FLOAT | DoubleRange (-20.0 .. 5.0) | |
| mod.symbolrate | FLOAT | DoubleRange (2.000000 .. 66.000000) | |
| mod.standard | CHOICE | EnumRange (DVB-S DVB-S2) | |
| mod.type | CHOICE | EnumRange (BPSK QPSK 8PSK 16QAM 16APSK 32APSK) | |
| mod.fec | CHOICE | EnumRange (1/2 2/3 3/4 4/5 5/6 7/8 8/9 9/10 1/4 1/3 2/5 3/5) | |
| mod.rollOff | CHOICE | EnumRange (20% 25% 30% 35%) | |
| mod.rfon | CHOICE | EnumRange (OFF ON) | |
| mod.modulation | CHOICE | EnumRange (OFF ON) | |
| mod.spectrum | CHOICE | EnumRange (NORM INVERT) | |
| mod.rateAdapter | CHOICE | EnumRange (OFF ON) | |
| mod.frequency | FLOAT | DoubleRange (50.000 .. 180.000) | |
| mod.pilot | CHOICE | EnumRange (OFF ON) | |
| mod.frameSize | CHOICE | EnumRange (NORMAL SHORT) | |
| mod.mapMode | CHOICE | EnumRange (PEAK PWR MEAN PWR) | |
| mod.ifTilt | FLOAT | DoubleRange (-0.040 .. 0.040) | |
| mod.goldSeqNum | INTEGER | IntegerRange (0 .. 262141) | |
| mod.upconverter | CHOICE | EnumRange (OFF ON) | |
| mod.reference | CHOICE | EnumRange (OFF ON) | |
| faultList | TEXT | R/O | StringRange R/O |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Host Controller Alarm) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Host Controller Warn) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (Input Card Alarm) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (Input Card Warning) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (Baseband Alarm) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Baseband Warning) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (IF Card Alarm) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (IF Card Warning) |