User Manual

9.760 Work-RSCM

This page describes the device driver and the device window for the Work Microwave RSCM N:1 Redundancy Switch

Works-RSCM should be used for single channel up or downconverters
Works-RSCM-Dual should be used for dual channel up or downconverters
Works-RSCM-Triple should be used for triple channel up or downconverters
Works-RSCM-Quad should be used for quad channel up or downconverters

Device window pages

The following table shows which device window pages are available with this individual device type.

--- The switch parameters
--- The channel parameters
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.

Configuration parameters

At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the controller.

parameter --- description
address --- The device address (decimal) as set at the device's front panel.
converterType --- The units converter type. Informational only.
extRef.x --- The external reference source of the individual unit.
- INTERNAL
- EXTERNAL
- AUTO
bandSelect.x --- The band selection of the individual unit.
- BAND-1
- BAND-2
hasEqualizer --- Defines if the units are equipped with an equalizer.

Variables defined by this device driver

name	type	flags	range
info.driver	TEXT	R/O	StringRange R/O
lowLevel.cmd	TEXT		StringRange
lowLevel.reply	TEXT	R/O	StringRange R/O
faults.99	ALARM	R/O	AlarmFlagRange R/O (Communication)
faults.commstat	TEXT	R/O	StringRange R/O
info.type	TEXT	R/O	StringRange R/O
info.port	TEXT	R/O	StringRange R/O
info.frame	TEXT	R/O	StringRange R/O
info.serial	TEXT	R/O	StringRange R/O
info.revision1	TEXT	R/O	StringRange R/O
info.revision2	TEXT	R/O	StringRange R/O
config.converterType	CHOICE	SAVE SETUP	EnumRange (UNKNOWN UPCONVERTER DOWNCONVERTER)
config.extRef.0	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.1	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.2	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.3	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.4	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.5	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.6	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.7	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.extRef.8	CHOICE	SETUP	EnumRange DIS (INTERNAL EXTERNAL AUTO)
config.bandSelect.0	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.1	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.2	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.3	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.4	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.5	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.6	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.7	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
config.bandSelect.8	CHOICE	SETUP	EnumRange DIS (BAND-1 BAND-2)
internal.0	TEXT	R/O	StringRange R/O
internal.1	TEXT	R/O	StringRange R/O
internal.2	TEXT	R/O	StringRange R/O
internal.3	TEXT	R/O	StringRange R/O
internal.4	TEXT	R/O	StringRange R/O
internal.5	TEXT	R/O	StringRange R/O
internal.6	TEXT	R/O	StringRange R/O
internal.7	TEXT	R/O	StringRange R/O
internal.8	TEXT	R/O	StringRange R/O
location	CHOICE		EnumRange (AUTO CHANNEL-1 CHANNEL-2 CHANNEL-3 CHANNEL-4 CHANNEL-5 CHANNEL-6 CHANNEL-7 CHANNEL-8 OFF)
location.1	CHOICE	R/O	EnumRange R/O (A B)
location.2	CHOICE	R/O	EnumRange R/O (A B)
location.3	CHOICE	R/O	EnumRange R/O (A B)
location.4	CHOICE	R/O	EnumRange R/O (A B)
location.5	CHOICE	R/O	EnumRange R/O (A B)
location.6	CHOICE	R/O	EnumRange R/O (A B)
location.7	CHOICE	R/O	EnumRange R/O (A B)
location.8	CHOICE	R/O	EnumRange R/O (A B)
chain.0.enable	CHOICE		EnumRange DIS (OFF ON)
chain.1.enable	CHOICE		EnumRange DIS (OFF ON)
chain.2.enable	CHOICE		EnumRange DIS (OFF ON)
chain.3.enable	CHOICE		EnumRange DIS (OFF ON)
chain.4.enable	CHOICE		EnumRange DIS (OFF ON)
chain.5.enable	CHOICE		EnumRange DIS (OFF ON)
chain.6.enable	CHOICE		EnumRange DIS (OFF ON)
chain.7.enable	CHOICE		EnumRange DIS (OFF ON)
chain.8.enable	CHOICE		EnumRange DIS (OFF ON)
chain.0.name	TEXT	R/O	StringRange R/O DIS
chain.1.name	TEXT	R/O	StringRange R/O DIS
chain.2.name	TEXT	R/O	StringRange R/O DIS
chain.3.name	TEXT	R/O	StringRange R/O DIS
chain.4.name	TEXT	R/O	StringRange R/O DIS
chain.5.name	TEXT	R/O	StringRange R/O DIS
chain.6.name	TEXT	R/O	StringRange R/O DIS
chain.7.name	TEXT	R/O	StringRange R/O DIS
chain.8.name	TEXT	R/O	StringRange R/O DIS
chain.0.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.1.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.2.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.3.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.4.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.5.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.6.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.7.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
chain.8.chainFault	BOOLEAN	R/O	BooleanRange R/O (true false)
ch0.on	CHOICE		EnumRange DIS (OFF ON)
ch0.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch0.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch0.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch0.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch1.on	CHOICE		EnumRange DIS (OFF ON)
ch1.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch1.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch1.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch1.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch1.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch1.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch2.on	CHOICE		EnumRange DIS (OFF ON)
ch2.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch2.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch2.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch2.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch2.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch2.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch3.on	CHOICE		EnumRange DIS (OFF ON)
ch3.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch3.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch3.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch3.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch3.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch3.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch4.on	CHOICE		EnumRange DIS (OFF ON)
ch4.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch4.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch4.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch4.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch4.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch4.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch5.on	CHOICE		EnumRange DIS (OFF ON)
ch5.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch5.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch5.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch5.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch5.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch5.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch6.on	CHOICE		EnumRange DIS (OFF ON)
ch6.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch6.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch6.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch6.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch6.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch6.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch7.on	CHOICE		EnumRange DIS (OFF ON)
ch7.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch7.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch7.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch7.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch7.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch7.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
ch8.on	CHOICE		EnumRange DIS (OFF ON)
ch8.attn	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch8.gain	FLOAT		DoubleRange DIS (0.0 .. 30.0)
ch8.freq	FLOAT		DoubleRange DIS (0.000 .. 0.000)
ch8.attnOffset	FLOAT		DoubleRange DIS (-30.0 .. 30.0)
ch8.eq	INTEGER		IntegerRange DIS (-64 .. 64)
ch8.eqOffset	INTEGER		IntegerRange DIS (-64 .. 64)
internal.l	CHOICE	R/O	EnumRange R/O (OFF AUTO CHANNEL-1 CHANNEL-2 CHANNEL-3 CHANNEL-4 CHANNEL-5 CHANNEL-6 CHANNEL-7 CHANNEL-8)
faults.01	ALARM	R/O	AlarmFlagRange R/O (PSU1)
faults.02	ALARM	R/O	AlarmFlagRange R/O (PSU2)
faults.03	ALARM	R/O	AlarmFlagRange R/O (Switched)
faults.04	ALARM	R/O	AlarmFlagRange R/O (Protection)
faults.10	ALARM	R/O	AlarmFlagRange R/O (Unit 0 Fault)
faults.11	ALARM	R/O	AlarmFlagRange R/O (Unit 1 Fault)
faults.12	ALARM	R/O	AlarmFlagRange R/O (Unit 2 Fault)
faults.13	ALARM	R/O	AlarmFlagRange R/O (Unit 3 Fault)
faults.14	ALARM	R/O	AlarmFlagRange R/O (Unit 4 Fault)
faults.15	ALARM	R/O	AlarmFlagRange R/O (Unit 5 Fault)
faults.16	ALARM	R/O	AlarmFlagRange R/O (Unit 6 Fault)
faults.17	ALARM	R/O	AlarmFlagRange R/O (Unit 7 Fault)
faults.18	ALARM	R/O	AlarmFlagRange R/O (Unit 8 Fault)