9.776 Work-VCR

This page describes the device driver and the device window for the Work Remote Control Unit VRC for Up/Downconverters. It is a monitoring only driver as addition to the existing device drivers for the respective Up and Downconverter units.

Device window pages

The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .

Configuration parameters

At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the controller.

parameter description
address The device address (Default = A)

Variables defined by this device driver

name type flags range
info.driver TEXT R/O StringRange R/O
lowLevel.cmd TEXT StringRange
lowLevel.reply TEXT R/O StringRange R/O
faults.99 ALARM R/O AlarmFlagRange R/O (Communication)
faults.commstat TEXT R/O StringRange R/O
info.type TEXT R/O StringRange R/O
info.port TEXT R/O StringRange R/O
info.frame TEXT R/O StringRange R/O
info.serial TEXT R/O StringRange R/O
info.FrontBaseVersion TEXT R/O StringRange R/O
info.FrontDeviceVersion TEXT R/O StringRange R/O
info.BaseSystemVersion TEXT R/O StringRange R/O
info.InterfaceVersion TEXT R/O StringRange R/O
config.readBackDelay INTEGER SAVE SETUP IntegerRange (100 .. 10000)
info.temp.frontpanel FLOAT R/O DoubleRange R/O (0.0 .. 0.0)
info.temp.controller FLOAT R/O DoubleRange R/O (0.0 .. 0.0)
internal.sa0 TEXT R/O StringRange R/O
faults.01 ALARM R/O AlarmFlagRange R/O (Converter Com)
faults.02 ALARM R/O AlarmFlagRange R/O (Remote access)
faults.03 ALARM R/O AlarmFlagRange R/O (External Mute)
faults.04 ALARM R/O AlarmFlagRange R/O (EEPROM)
faults.05 ALARM R/O AlarmFlagRange R/O (High Temp.)
faults.06 ALARM R/O AlarmFlagRange R/O (Low Temp.)
faults.07 ALARM R/O AlarmFlagRange R/O (NTP)
faults.08 ALARM R/O AlarmFlagRange R/O (Summary)