--- Contains only a button to triggere the copy process
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.This page describes the device driver and the device window for the Zodiac-Cortex-DTR-Cal device. This device supports the phase calibration of a Zodiac DTR together with a HITEC monopulse ACU. The calibration values determined in the ACU are copied into the memory of the DTR.
This very special device works only together with the Zodiac-Cortex-DTR and the Hitec-HACU-01 devices.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- Contains only a button to triggere the copy process --- The faults page. --- The device info page. --- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to integrate the device into the VLC/M&C.
| parameter | description |
|---|---|
| acuName | The device name of the ACU. |
| dtrName | The device name of the DTR |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| config.acuName | TEXT | SAVE SETUP | StringRange |
| config.dtrName | TEXT | SAVE SETUP | StringRange |
| setCalibration | TEXT | NOPRESET | StringRange |