The ACU provides a SNMP agent which permits to monitor and control all relevant parameters of the device using an SNMP network management system. The SNMP agent listens at the SNMP standard port 162, it complies to the SNMPv1 standard. The read / write community strings default to ‘public’, this may be changed through the ACU’s WebGUI at the ‘Setup’ page.
All ACU parameters are collected in an enterprise specific MIB which may be downloaded from the device at the ‘Setup’ page. The 3-axis and 4-axis models of the ACU are using different MIBs. The 3-axis MIB (named ACU2.MIB) is widely compatible to former models of the ACU. The MIB for the 4-axis model (ACU3.MIB) has been re-organized to have the 4th axis’ parameters at positions in the MIB where you would expect them rather than putting them at the very end to avoid changes of existing OIDs.