Technical Specification
- Position Encoding with three different interfaces via
daughter boards : Resolver, digital SSI and potentiometer
- Quantization Error : Resolver 16bit: 0.0055°, SSI
13bit 0.044°, 16bit 0.0055°, 17bit 0.0028°, 19bit 0.0007°
- Display Position resolution : 0.001°
- Interface to beacon receivers selectable :
sat-nms LBRX or analog voltage input
- Analog voltage input : 0 to 10V
- Option Tracking Accuracy : Better than 5% of
receive 3dB beamwidth (RMS). The encoder coupling and alignment error
should not exceed 0.003° to achieve the specified tracking accuracy. The
influence of antenna structure thermal error is not considered.
- System Interfaces
- angle detectors and Emergency Stop: DSub9 female
- limit switches: DSub9 male
- MNC: RJ45
- analog beacon: SMA female
- Mains UPS: HAN A 3pol+PE male
- Motor mains: HAN B 6pol+PE male
- AZ+EL Motors: HAN B 6pol+PE female
- POL-Motor: HAN A 3pol+PE female
- to M&C and ACU-IDU: Ethernet
- 4 (6) drive limit switches´: Azimuth, Elevation (and
Polarization)
- Emergency stop and motors off switch: terminals
- 2 (3) angular detectors : Azimuth, Elevation (and
Polarization)
- Motor driver : DC motor drivers, depending on power
supply up to 35VDC/15A, optional 48VDC/15A, standard power supply is
24VDC/10A
- optional local operation : Handheld with display
and keyboard
M&C Interface Specification
- Ethernet interface for M&C and user interface :
10-Base-T, Via http GET requests
- RS232/RS422 M&C Interface : Mini Combicon
MCV1
- Summary fault indication : Relay contact Mini
Combicon MCV1
Electrical and Mechanical Specification, Environmental
Conditions
- Supply voltage mains : 230V AC, 3A with standard
motor power supply
- Temperature range : -20° to 35° C without optional
air ventilation -20° to +55° C with optional air ventilation
- protection class : IP66 without optional air
ventilation IP54 with optional air ventilation
- dimensions cabinet : 380x235x680mm (width x depth x
height including roof)
- Weight : depending on power supply, approx.
22kg