Configuration of the IO-FEP2 inputs starts at register 01001. The setup data for each input covers 20 registers, meaning that the setup configuration for input 2 starts at 01021, for input 3 at 01041 and so on. Setup of input 48 starts at address 01941 and ends with and including 01958.
Inputs which are not licensed are forced to "not used" by the. IO-FEP2 Configuring them to an active state has no effect.
The register definitions for input 1 are:
Register Purpose Remarks
01001 input 1 type 0 = not used
definition 1 = normal input
2 = alarm input
01002 input 1 name up to 29 characters +
0-termination in 15
registers
01017 input 1 invert 0 = not inverting, current flow
causes a '1' bit.
1 = inverting, missing current
causes a '1' bit
01018 input 1 delay msecs