After entering the IP-address to the browser the local chassis parameter will be displayed. With pressing the State button, all the parameters of the chassis are displayed. On the top of the page, you can read the name of the unit, that can be set on the 'Setup' page. Also you can see the state of the 2 power supplies and the frame temperature.
Underneath all the measured parameters of the LFTX or LFRX cards are displayed for every slot. In the first line, you can read the number of the slot. Followed by the summary state 'Faults' and the induvidual 'Note' per Slot. The Name of every slot can be changed in the 'Config' menu. As next the Card Type is displayed, whether a LFRX-, a LFTX-, a LFSW´- or no card is placed to the corresponding slot. The next fields 'RF Pwr', 'Diode RF Pwr.', 'RF Threshold', 'LNB Current' define the measurement values of each slot. The colour code of the values define the actual state. The following states can be displayed:
| Parameter Name | Description |
|---|---|
| green | All parameters are within the given range, everything is ok. |
| red | One or more parameters is out of range, fault state. |
| orange | One or more parameters is out of range, but defined as warning state. |