--- The operational parametersThis page describes the monitoring only device driver and the device window for the Hitec Antenna Front Panel. The driver covers the De-icing related parameters.
Device window pages
The following table shows which device window pages are available with this individual device type.
--- The operational parametersConfiguration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the unit.
| parameter | description |
|---|---|
| address | The device address (decimal) as set at the device's front panel. |
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| config.readBackDelay | INTEGER | SAVE SETUP | IntegerRange (100 .. 10000) |
| deice.status | CHOICE | EnumRange (OFF AUTOMATIC) | |
| deice.auto | CHOICE | EnumRange (OFF ON) | |
| deice.remote | BOOLEAN | R/O | BooleanRange R/O (true false) |
| deice.requested | BOOLEAN | R/O | BooleanRange R/O (true false) |
| feedblower.status | CHOICE | R/O | EnumRange R/O (OFF ON) |
| state.rain | BOOLEAN | R/O | BooleanRange R/O (true false) |
| feedblower.remote | BOOLEAN | R/O | BooleanRange R/O (true false) |
| deice.a | BOOLEAN | R/O | BooleanRange R/O (true false) |
| deice.b | BOOLEAN | R/O | BooleanRange R/O (true false) |
| deice.c | BOOLEAN | R/O | BooleanRange R/O (true false) |
| deice.subref | BOOLEAN | R/O | BooleanRange R/O (true false) |
| temp.outsite | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| temp.aped | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| temp.ahub | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| temp.driveCabinet | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| temp.fanDriveCabinet | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| temp.waterTank | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| humidity.outsite | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| humidity.aped | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| humidity.ahub | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (RF Summary) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (HVAC Summary) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (Deicing Summary) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (Feed blower fuse) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (Feed blower) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (Deicing fuse) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (High Subref.Temp.) |
| faults.14 | ALARM | R/O | AlarmFlagRange R/O (Deicing trapech) |
| faults.20 | ALARM | R/O | AlarmFlagRange R/O (Protection) |
| faults.21 | ALARM | R/O | AlarmFlagRange R/O (Remote Access) |
| internal.r | INTEGER | R/O | IntegerRange R/O (0 .. 0) |