This page describes the device driver and the device window for the Newtec M6100 DVB-S2 Modulator.
Device window pages
The following table shows which device window pages are available with this individual device type. Tool-bar functions not mentioned here are described at the general description of device windows .
--- The IF parameters (frequency, level, etc.) and some global settings.
--- The modulator settings.
--- The TX interface settings.
--- The transport stream multiplexer settings.
--- Shows statistical values, error rates etc.
--- The transport stream analyzer page
--- The faults page.
--- The device info page.
--- The maintenance page. The configuration parameters described below are set at this page.Configuration parameters
At the maintenance page of the device window there are a couple of configuration parameters which must be set to make the software talk to the M6100.
parameter --- description
address --- The SNMP address specification for the device. The full address specification consists of the following fields:aaa.bbb.ccc.ddd:pppp read-community write-community
ratePriority --- Selects if the modultor shall keep the symbol rate or the interface rate constant if e.g. modulation or fec rate is changed.
extLoFreq --- The LO frequency of an external upconverter.
extLoPolarity --- With NRM the driver assumes an LO frequency below the RF transmit frequency. With INV the LO frequency is assumed above the RF frequency.
output10MHz --- Selects if a 10MHz reference clock shall be present at the L-Band output.
onDeviceAlarm --- Specifies what to do on device alarms (IGNORE / TX-OFF)
onIfcAlarm --- Specifies what to do on interface alarms (IGNORE / TX-OFF)
Variables defined by this device driver
| name | type | flags | range |
|---|---|---|---|
| info.driver | TEXT | R/O | StringRange R/O |
| lowLevel.cmd | TEXT | StringRange | |
| lowLevel.reply | TEXT | R/O | StringRange R/O |
| faults.99 | ALARM | R/O | AlarmFlagRange R/O (Communication) |
| faults.commstat | TEXT | R/O | StringRange R/O |
| info.type | TEXT | R/O | StringRange R/O |
| info.port | TEXT | R/O | StringRange R/O |
| info.frame | TEXT | R/O | StringRange R/O |
| info.hwID | TEXT | R/O | StringRange R/O |
| info.hwRevision | TEXT | R/O | StringRange R/O |
| info.swID | TEXT | R/O | StringRange R/O |
| info.swRevision | TEXT | R/O | StringRange R/O |
| info.serialNo | TEXT | R/O | StringRange R/O |
| info.internalTemp | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| info.pwrSupply | FLOAT | R/O | DoubleRange R/O (0.00 .. 0.00) |
| info.signal.on | CHOICE | R/O | EnumRange R/O (OFF ON) |
| config.ratePriority | CHOICE | SETUP | EnumRange (SYMBOL INTERFACE) |
| config.tsoipRate | CHOICE | SAVE SETUP | EnumRange (MANUAL AUTOMATIC) |
| config.extLoFreq | FLOAT | SAVE SETUP | DoubleRange (0.0 .. 0.0) |
| config.extLoPolarity | CHOICE | SAVE SETUP | EnumRange (NRM INV) |
| config.output10Mhz | CHOICE | SETUP | EnumRange (OFF ON) |
| config.onDeviceAlarm | CHOICE | SETUP | EnumRange (IGNORE TX OFF) |
| config.onIfcAlarm | CHOICE | SETUP | EnumRange (IGNORE TX OFF) |
| config.minOutputLevel | FLOAT | SAVE SETUP | DoubleRange (0.0 .. 0.0) |
| config.maxOutputLevel | FLOAT | SAVE SETUP | DoubleRange (0.0 .. 0.0) |
| config.readBackDelay | INTEGER | IntegerRange (0 .. 0) | |
| config.hasProtectTSoIP | CHOICE | SAVE SETUP | EnumRange (NO YES) |
| refClkSrc | CHOICE | EnumRange (INTERN EXTERN) | |
| refClkFreq | CHOICE | EnumRange (1 MHz 2 MHz 5 MHz 10 MHz 20 MHz) | |
| saveBootConfig | TEXT | NOPRESET | StringRange |
| unsavedChanges | BOOLEAN | R/O | BooleanRange R/O (true false) |
| dvbMode | CHOICE | EnumRange (DVB-S DVB-S2) | |
| tx.on | CHOICE | EnumRange (OFF ON) | |
| tx.frequency | FLOAT | DoubleRange (0.0000 .. 0.0000) | |
| tx.power | FLOAT | DoubleRange (-35.0 .. 10.0) | |
| tx.mod.rollOff | CHOICE | EnumRange (5% 10% 15% 20% 25% 35%) | |
| tx.mod.occupiedBw | FLOAT | R/O | DoubleRange R/O (0.000000 .. 0.000000) |
| tx.mod.measuredRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tx.mod.spectrumInvert | CHOICE | EnumRange (NRM INV) | |
| tx.mod.cwMode | CHOICE | EnumRange (CW MOD CLK/8 CLK/4 CLK/16) | |
| tx.mod.amplitudeEQ | INTEGER | IntegerRange (-7 .. 7) | |
| tx.mod.dataRate | FLOAT | DoubleRange (0.00000 .. 0.00000) | |
| tx.mod.symbolRate | FLOAT | DoubleRange (0.00000 .. 0.00000) | |
| tx.mod.type | CHOICE | EnumRange (QPSK-1/4 QPSK-1/3 QPSK-2/5 QPSK-1/2 QPSK-3/5 QPSK-2/3 QPSK-3/4 QPSK-4/5 QPSK-5/6 QPSK-8/9 QPSK-9/10 8PSK-3/5 8PSK-2/3 8PSK-3/4 8PSK-5/6 8PSK-8/9 8PSK-9/10 16APSK-2/3 16APSK-3/4 16APSK-4/5 16APSK-5/6 16APSK-8/9 16APSK-9/10 32APSK-3/4 32APSK-4/5 32APSK-5/6 32APSK-8/9 32APSK-9/10) | |
| tx.mod.modcod | CHOICE | EnumRange (QPSK-1/4 QPSK-1/3 QPSK-2/5 QPSK-1/2 QPSK-3/5 QPSK-2/3 QPSK-3/4 QPSK-4/5 QPSK-6/7 QPSK-7/8 QPSK-5/6 QPSK-8/9 QPSK-9/10 8PSK-3/5 8PSK-2/3 8PSK-3/4 8PSK-5/6 8PSK-8/9 8PSK-9/10 16QAM-3/4 16QAM-7/8 16APSK-2/3 16APSK-3/4 16APSK-4/5 16APSK-5/6 16APSK-8/9 16APSK-9/10 32APSK-3/4 32APSK-4/5 32APSK-5/6 32APSK-8/9 32APSK-9/10) | |
| tx.mod.fec | CHOICE | EnumRange (1/2 1/3 1/4 2/3 2/5 3/4 3/5 4/5 5/6 8/9 9/10) | |
| tx.mod.modulation | CHOICE | EnumRange (QPSK 8PSK 16QAM 16APSK 32APSK) | |
| tx.mod.fecFrameType | CHOICE | EnumRange (SHORT NORMAL) | |
| tx.mod.insertPilots | CHOICE | EnumRange (ON OFF) | |
| tx.mod.isi | INTEGER | IntegerRange (0 .. 255) | |
| tx.mod.input | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tx.asi.in.inputSelect | CHOICE | EnumRange (NONE ASI 1 ASI 2 ASI 1 OR 2 ASI 1 BEFORE 2 ASI 2 BEFORE 1 PBRS GENERATOR) | |
| protection | CHOICE | R/O | EnumRange R/O (OFF ON) |
| tx.asi.in.activeInput | CHOICE | R/O | EnumRange R/O (OFF ASI 1 ASI 2) |
| tx.asi.in.position | CHOICE | R/O | EnumRange R/O (A B NONE) |
| tx.asi.in.inlineSplit | CHOICE | EnumRange (NONE 3DB SPLIT 6DB SPLIT) | |
| tx.asi.in.measuredRate | FLOAT | R/O | DoubleRange R/O (0.000000 .. 0.000000) |
| tx.asi.in.inputFraming | CHOICE | EnumRange (TS 188 TS 204) | |
| tx.asi.in.itfSwitchCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.asi.in.pbrsRate | FLOAT | DoubleRange (0.000000 .. 0.000000) | |
| tx.asi.in.pbrsType | CHOICE | EnumRange (PBRS COUNTER) | |
| tx.asi.in.pbrsPid | CHOICE | EnumRange (OFF ON) | |
| tx.asi.in.pbrsPidVal | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.in.pbrsDPackets | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.in.pbrsNPackets | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.out.signalSelect | CHOICE | EnumRange (NONE MODULATOR INPUT ACTIVE INPUT NONACTIVE INPUT PBRS GENERATOR) | |
| tx.asi.out.outputSelect | CHOICE | EnumRange (NONE ASI 1 ASI 2 ASI 1 AND 2) | |
| tx.asi.out.measuredRate | FLOAT | R/O | DoubleRange R/O (0.000000 .. 0.000000) |
| tx.asi.out.pbrsRate | FLOAT | DoubleRange (0.000000 .. 0.000000) | |
| tx.asi.out.pbrsType | CHOICE | EnumRange (PBRS COUNTER) | |
| tx.asi.out.pbrsPid | CHOICE | EnumRange (OFF ON) | |
| tx.asi.out.pbrsPidVal | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.out.pbrsDPackets | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.out.pbrsNPackets | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.mon.enable | CHOICE | EnumRange (OFF ON) | |
| tx.asi.mon.pid | CHOICE | EnumRange (OFF ON) | |
| tx.asi.mon.pidVal | INTEGER | IntegerRange (0 .. 0) | |
| tx.asi.mon.state | TEXT | R/O | StringRange R/O |
| tx.asi.mon.syncSecs | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.asi.mon.errorCount | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.asi.mon.errorRate | FLOAT | R/O | DoubleRange R/O (0.0 .. 0.0) |
| tx.tsoip.enable | CHOICE | EnumRange (OFF ON) | |
| tx.tsoip.inputSelect | CHOICE | EnumRange (NONE DATA 1 DATA 2 DATA) | |
| tx.tsoip.encapProtocol | CHOICE | EnumRange (UDP RTP RTP WITH FEC) | |
| tx.tsoip.addressType | CHOICE | EnumRange (UNICAST MULTICAST) | |
| tx.tsoip.mcastAddress | TEXT | StringRange | |
| tx.tsoip.udpPort | INTEGER | IntegerRange (0 .. 0) | |
| tx.tsoip.trafficProfile | CHOICE | EnumRange (VBR CBR) | |
| tx.tsoip.maxTrafJitter | INTEGER | IntegerRange (0 .. 0) | |
| tx.tsoip.maxBuffDelay | INTEGER | IntegerRange (0 .. 0) | |
| tx.tsoip.dataRate | FLOAT | DoubleRange (0.000000 .. 0.000000) | |
| tx.tsoip.reset | TEXT | StringRange | |
| tx.tsoip.mon.dataRate | FLOAT | R/O | DoubleRange R/O (0.000000 .. 0.000000) |
| tx.tsoip.mon.buffDelay | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.maxBuffFill | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.minBuffFill | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.tsInCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.tsDropCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.tsOFlwCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.rtpInCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.rtpDropCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.tsoip.mon.rtpRepairCnt | INTEGER | R/O | IntegerRange R/O (0 .. 0) |
| tx.mux.input.1.name | TEXT | R/O | StringRange R/O |
| tx.mux.input.1.enable | CHOICE | EnumRange (OFF ON) | |
| tx.mux.input.2.name | TEXT | R/O | StringRange R/O |
| tx.mux.input.2.enable | CHOICE | EnumRange (OFF ON) | |
| tx.mux.ra.enable | CHOICE | EnumRange (OFF ON) | |
| tx.mux.ra.nullpDrop | CHOICE | EnumRange (OFF ON) | |
| tx.mux.ra.pcrRestamp | CHOICE | EnumRange (OFF ON) | |
| tx.mux.sig.networkId | INTEGER | IntegerRange (0 .. 0) | |
| tx.mux.sig.tsId | INTEGER | IntegerRange (0 .. 0) | |
| tx.mux.sig.patRepRate | INTEGER | IntegerRange (0 .. 0) | |
| tx.mux.sig.sdtRepRate | INTEGER | IntegerRange (0 .. 0) | |
| tx.mux.cid.enable | CHOICE | EnumRange (OFF ON) | |
| tx.mux.cid.descrTag | INTEGER | IntegerRange (0 .. 0) | |
| tx.mux.cid.carrierId | TEXT | StringRange | |
| tx.mux.cid.telnNo | TEXT | StringRange | |
| tx.mux.cid.userInfo | TEXT | StringRange | |
| tsanalyzer.enable | CHOICE | EnumRange (OFF ON) | |
| tsanalyzer.reset | TEXT | StringRange | |
| tsanalyzer.estimatedRate | FLOAT | R/O | DoubleRange R/O (0.000000 .. 0.000000) |
| tsanalyzer.pidList | TEXT | R/O | StringRange R/O |
| tsanalyzer.1.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.1.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.1.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.1.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.1.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.2.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.2.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.2.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.2.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.2.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.3.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.3.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.3.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.3.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.3.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.4.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.4.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.4.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.4.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.4.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.5.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.5.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.5.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.5.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.5.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.6.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.6.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.6.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.6.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.6.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.7.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.7.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.7.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.7.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.7.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.8.enable | CHOICE | SAVE | EnumRange (OFF ON) |
| tsanalyzer.8.pid | INTEGER | SAVE | IntegerRange (0 .. 0) |
| tsanalyzer.8.dataRate | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| tsanalyzer.8.continuityErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| tsanalyzer.8.transportErr | BOOLEAN | R/O | BooleanRange R/O (true false) |
| reset | TEXT | NOPRESET | StringRange |
| tx.prot.tsoip.enable | CHOICE | EnumRange DIS (OFF ON) | |
| tx.prot.tsoip.inputSelect | CHOICE | EnumRange DIS (TSoIP1 TSoIP2 TSoIP1-OR-TSoIP2 TSoIP1-BEFORE-TSoIP2 TSoIP2-BEFORE-TSoIP1) | |
| tx.prot.tsoip.thresholdEnable | CHOICE | EnumRange DIS (OFF ON) | |
| tx.prot.tsoip.thresholdMaxRate | FLOAT | DoubleRange DIS (0.000000 .. 0.000000) | |
| tx.prot.tsoip.timeWindow | FLOAT | DoubleRange DIS (0.1 .. 5.0) | |
| tx.prot.tsoip.reset | TEXT | NOPRESET | StringRange DIS |
| tx.prot.tsoip.1.inputSelect | CHOICE | EnumRange DIS (NONE DATA 1 DATA 2 BOND ANY) | |
| tx.prot.tsoip.2.inputSelect | CHOICE | EnumRange DIS (NONE DATA 1 DATA 2 BOND ANY) | |
| tx.prot.tsoip.1.encapProtocol | CHOICE | EnumRange DIS (UDP RTP RTP WITH FEC) | |
| tx.prot.tsoip.2.encapProtocol | CHOICE | EnumRange DIS (UDP RTP RTP WITH FEC) | |
| tx.prot.tsoip.1.addressType | CHOICE | EnumRange DIS (UNICAST MULTICAST) | |
| tx.prot.tsoip.2.addressType | CHOICE | EnumRange DIS (UNICAST MULTICAST) | |
| tx.prot.tsoip.1.mcastAddress | TEXT | StringRange DIS | |
| tx.prot.tsoip.2.mcastAddress | TEXT | StringRange DIS | |
| tx.prot.tsoip.1.udpPort | INTEGER | IntegerRange DIS (0 .. 0) | |
| tx.prot.tsoip.2.udpPort | INTEGER | IntegerRange DIS (0 .. 0) | |
| tx.prot.tsoip.1.trafficProfile | CHOICE | EnumRange DIS (VBR CBR) | |
| tx.prot.tsoip.2.trafficProfile | CHOICE | EnumRange DIS (VBR CBR) | |
| tx.prot.tsoip.1.rateType | CHOICE | EnumRange DIS (USER DEFINED PCR) | |
| tx.prot.tsoip.2.rateType | CHOICE | EnumRange DIS (USER DEFINED PCR) | |
| tx.prot.tsoip.1.pcrAuto | CHOICE | EnumRange DIS (OFF ON) | |
| tx.prot.tsoip.2.pcrAuto | CHOICE | EnumRange DIS (OFF ON) | |
| tx.prot.tsoip.1.pcrPid | INTEGER | IntegerRange DIS (0 .. 8191) | |
| tx.prot.tsoip.2.pcrPid | INTEGER | IntegerRange DIS (0 .. 8191) | |
| tx.prot.tsoip.1.maxBuffDelay | INTEGER | IntegerRange DIS (0 .. 0) | |
| tx.prot.tsoip.2.maxBuffDelay | INTEGER | IntegerRange DIS (0 .. 0) | |
| tx.prot.tsoip.1.dataRate | FLOAT | DoubleRange DIS (0.000000 .. 0.000000) | |
| tx.prot.tsoip.2.dataRate | FLOAT | DoubleRange DIS (0.000000 .. 0.000000) | |
| tx.prot.tsoip.mon.dataRate | FLOAT | R/O | DoubleRange R/O DIS (0.000000 .. 0.000000) |
| tx.prot.tsoip.activeInput | CHOICE | R/O | EnumRange R/O DIS (NONE TSoIP1 TSoIP2) |
| tx.prot.tsoip.1.mon.dataRate | FLOAT | R/O | DoubleRange R/O DIS (0.000000 .. 0.000000) |
| tx.prot.tsoip.2.mon.dataRate | FLOAT | R/O | DoubleRange R/O DIS (0.000000 .. 0.000000) |
| tx.prot.tsoip.1.mon.buffDelay | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.buffDelay | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.tsInCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.tsInCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.tsOutCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.tsOutCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.tsDropCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.tsDropCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.tsOFlwCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.tsOFlwCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.rtpInCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.rtpInCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.rtpDropCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.rtpDropCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.rtpRepairCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.rtpRepairCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.fecColIn | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.fecColIn | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.fecRowIn | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.fecRowIn | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.fecDropCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.fecDropCnt | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.switchCount | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.maxBuffFill | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.maxBuffFill | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.minBuffFill | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.minBuffFill | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.1.mon.source | TEXT | R/O | StringRange R/O DIS |
| tx.prot.tsoip.2.mon.source | TEXT | R/O | StringRange R/O DIS |
| tx.prot.tsoip.1.mon.fecMode | TEXT | R/O | StringRange R/O DIS |
| tx.prot.tsoip.2.mon.fecMode | TEXT | R/O | StringRange R/O DIS |
| tx.prot.tsoip.1.mon.actPcrPid | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| tx.prot.tsoip.2.mon.actPcrPid | INTEGER | R/O | IntegerRange R/O DIS (0 .. 0) |
| faults.01 | ALARM | R/O | AlarmFlagRange R/O (Device general) |
| faults.02 | ALARM | R/O | AlarmFlagRange R/O (Interface general) |
| faults.03 | ALARM | R/O | AlarmFlagRange R/O (ASI general) |
| faults.04 | ALARM | R/O | AlarmFlagRange R/O (ASI input signal) |
| faults.05 | ALARM | R/O | AlarmFlagRange R/O (ASI input data) |
| faults.06 | ALARM | R/O | AlarmFlagRange R/O (ASI buffer oflow) |
| faults.07 | ALARM | R/O | AlarmFlagRange R/O (TSoIP general) |
| faults.08 | ALARM | R/O | AlarmFlagRange R/O (TSoIP input data) |
| faults.09 | ALARM | R/O | AlarmFlagRange R/O (TSoIP buffer oflow) |
| faults.10 | ALARM | R/O | AlarmFlagRange R/O (TSoIP buffer uflow) |
| faults.11 | ALARM | R/O | AlarmFlagRange R/O (Mod general) |
| faults.12 | ALARM | R/O | AlarmFlagRange R/O (Mod input signal) |
| faults.13 | ALARM | R/O | AlarmFlagRange R/O (Mod buffer oflow) |
| faults.14 | ALARM | R/O | AlarmFlagRange R/O (Mod buffer uflow) |
| faults.15 | ALARM | R/O | AlarmFlagRange R/O (Mod synth) |
| faults.16 | ALARM | R/O | AlarmFlagRange R/O (Mod ref synth lock) |
| faults.17 | ALARM | R/O | AlarmFlagRange R/O (Mod lo1 lock) |
| faults.18 | ALARM | R/O | AlarmFlagRange R/O (Mod lo2 lock) |
| faults.19 | ALARM | R/O | AlarmFlagRange R/O (TA ts sync) |
| faults.20 | ALARM | R/O | AlarmFlagRange R/O (TA ts sync byte) |
| faults.21 | ALARM | R/O | AlarmFlagRange R/O (TA ts pat) |
| faults.22 | ALARM | R/O | AlarmFlagRange R/O (TA ts continuity) |
| faults.23 | ALARM | R/O | AlarmFlagRange R/O (TA ts pcr repetition) |
| faults.24 | ALARM | R/O | AlarmFlagRange R/O (TA ts pcr continuity) |
| faults.25 | ALARM | R/O | AlarmFlagRange R/O (TA ts pcr accuracy) |
| faults.26 | ALARM | R/O | AlarmFlagRange R/O (Protected 1 input data) |
| faults.27 | ALARM | R/O | AlarmFlagRange R/O (Protected 2 input data) |
| faults.28 | ALARM | R/O | AlarmFlagRange R/O (Protected 1 buffer uflow) |
| faults.29 | ALARM | R/O | AlarmFlagRange R/O (Protected 2 buffer uflow) |
| faults.30 | ALARM | R/O | AlarmFlagRange R/O (Protected 1 buffer oflow) |
| faults.31 | ALARM | R/O | AlarmFlagRange R/O (Protected 2 buffer oflow) |
| faults.32 | ALARM | R/O | AlarmFlagRange R/O (Protected 1 rtp sync) |
| faults.33 | ALARM | R/O | AlarmFlagRange R/O (Protected 2 rtp sync) |
| faults.34 | ALARM | R/O | AlarmFlagRange R/O (Protected red) |
| faults.35 | ALARM | R/O | AlarmFlagRange R/O (Protected red degraded) |
| faults.36 | ALARM | R/O | AlarmFlagRange R/O (Protected input data) |
| faults.37 | ALARM | R/O | AlarmFlagRange R/O (Protected buffer uflow) |
| faults.38 | ALARM | R/O | AlarmFlagRange R/O (Protected buffer oflow) |
| faults.39 | ALARM | R/O | AlarmFlagRange R/O (Protected rtp sync) |
| internal.dvbMode | TEXT | R/O | StringRange R/O |
| internal.freq | FLOAT | R/O | DoubleRange R/O (0.00000 .. 0.00000) |
| internal.tx.on | TEXT | R/O | StringRange R/O |
| internal.type | TEXT | R/O | StringRange R/O |