| Frequency range | 950 to 2150MHz (LFTXL/LFRXL) 50 to 2150MHz (LFTXB/LFRXB) 10MHz only (LFTXO10/LFRXO10) 950 to 2450MHz (LFTXW/LFRXW) |
| L-Band Input Connectors (Transmitter) | SMA female 50Ohm F-type female 75Ohm as option |
| L-Band Output Connector (Receiver) | SMA female 50Ohm F-type female 75Ohm as option |
| L-band input test connector (Transmitter) | SMA female 50 Ohm |
| L-band output test connector (Receiver) | SMA female 50 Ohm |
| Optical connectors | E2000/APC FC/APC as option |
| Input Return Loss | > 17dB |
| Output Return Loss | > 17dB |
| Input Noise Figure | < 30dB with 13dB attenuator setting |
| Gain (adjustable via local and remote interface) | +15 to -15dB in 1dB steps |
| Flatness | +/-1.5 dB, +/-0.25dB in any 40MHz |
| Input signal max (total level directly at LFTX card) |
-5 dBm |
| Output Level max (total power directly at LFRX card) |
-5dBm |
| Intermodulation at -13dBm Input Level (total level directly at LFTX card) |
<-40 dBc |
| DC-output at L-band input connector | 15+/-1V (for LFTXL Model only) |
| additional attenuation for optional modules: | --- |
| redundant backplane | typ. 3dB (4.5dB switched) per frame |
| 50/75Ohm converter | typ. 0.7dB per frame |
| 1:4 splitter | typ. 12.5dB per frame |
| dual coupler | typ. 1.5dB per frame |
| Ethernet interface for M&C and user interface | 10/100-Base-T, Via http GET requests |
| Front panel display | LCD 16x2 |
| RS232 M&C Interface | D-SUB 9 female |
| Summary fault indication | Relay contact D-SUB 9 male |
| I/O output for external WG-switching (transmitter) | SUB-D 9 female |
| Supply voltage | 100 to 240V AC 50 to 60Hz |
| Connector for the two mains voltage AC input | IEC |
| Redundant power supplies | Hot swap capability available as an option |
| Temperature range | -20 to + 50°C |
| Humidity | up to 90% non condensing |
| Mechanical size of mainframe | 436 x 89 x 350 mm (WxHxD), 19" 2HU |