The L-Band Switch Matrix' enclosure is a standard 19" rack-mountable enclosure. Depending on the configuration, the eclosure has a height of 3 HU (8x8 matrix), 6HU (16x16 matrix) or 9HU (32x32 matrix).
Use slide bars to install the L-Band Switch Matrix, because the mounting angles will not be able to hold the L-Band Switch Matrix in the horizontal position. Fix the enclosure with according screws to a 19" Rack. Don´t forget to connect the 'GND'-screw to the Rack.
The L-Band Switch Matrix will get warm during operation. To prevent an overheating leave at least 1HU below and above the L-Band switch matrix to allow the rejected heat to dissipate.