sat-nms PS User Manual

Version 2.0.007 -- 2021-07-29 -- © 2020-2021 SatService GmbH

Abstract

The sat-nms PowerSensor manufactured by SatService GmbH is a measurement tool which measures the RF output power of 14 or 6GHz satellite communications signals and provides this information both on a web page via an internal web server or as M&C output information for control systems.

This document describes how to install, setup and operate this antenna controller.

Table Of Contents

• 1 Introduction
• 2 Installation
  • 2.1 Safety Instructions
  • 2.2 Setting the IP Address
  • 2.3 Connecting the Power Sensor
  • 2.4 Mechanical installation
• 3 Operation
  • 3.1 The Web-based User Interface
  • 3.2 Displayed Readings
  • 3.3 Operational Parameters
• 4 Remote Control
  • 4.1 HTTP Protocol
  • 4.2 The 'read' command
  • 4.3 The 'set' Command
• 5 Theory of Operation
  • 5.1 Linearity and Temperature Compensation
  • 5.2 Frequency Response Calibration
• 6 Specifications