In the Operation mode, the following items can be monitored. After the power is turned ON, items set at parameter E43 are displayed. Monitor items can be switched by pressing the “ENTER� key. If the Operator is not operated for five minutes, the display automatically changes to the initial screen selected by E43.
By default, inverter shows the frequency. During operation (Start command active), it shows the actual output-frequency permanently. During standstill (Start command inactive), pre-selected frequency is shown blinking.
Following table shows some main values. There can be displayed a lot more values. Please refer to the manual of the Inverter if you need more details.
| Monitor item | Unit | Outline of display value | Function code/E43 data |
|---|---|---|---|
| Output frequency 1 (Before slip compensation) | [Hz] | Display value = Output frequency | 0 |
| Output frequency 2 (After slip compensation) | [Hz] | Display value = Output frequency | 1 |
| Set frequency | [Hz] | Display value = Set frequency | 2 |
| Output current | [A] | Inverter output current effective value | 3 |
| Output Voltage | [V] | Inverter output voltage effective value | 4 |
origin: OMRON user Documentation 3G3M1-STD User manual I669-E1-02.pdf