ATTENTION : If you use two sat-nms LFTX/RX chassis in master/slave mode, you have at first to configure and establish the connection between the master and the slave chassis. Otherwise all settings in the slave unit will be over-written on accomplishing the master/slave communication for the first time.
The slave unit will be configured automatically by the master unit in order to ensure correct redundancy-switch function.
| Parameter Name | Description |
|---|---|
| Master/Slave Comm. | Choose here the communication type between master and slave chassis. You have the choice between 'HTTP' or 'RS-232' depending in this selection, you have to set one of the following settings: |
| IP corresp. Chassis | In case of selecting the master/slave communication to 'HTTP' you have to type in here the IP address of the corresponding chassis. |
| Adr corresp. Chassis | In case of selecting the master/slave communication to 'RS-232' you have to type in here the RS 232 address of the corresponding chassis. |