1 Introduction

The DEICE-Controller supervises altogether 48 digital-inputs via optocoupler. Up to 4 different temperatures can be measured with external PT1000 sensors. To switch external units, the DEICE-Controller has 6 potential-free relay outputs, 10 photomos-relay outputs and 16 switchable 24V outputs.

The data output is provided by 2 different and parallel available interface types: a HTTP Web Interface via an internal Web Server, and a RS232 interface. The sat-nms DEICE-Controller is controlled remotely by a monitoring and control application through the TCP/IP interface. The DEICE-Controller implements the protocols HTTP (for both, the user interface and for remote control) and SNMP. The sat-nms DEICE-Controller MIB may be downloaded from the DEICE-Controller itself using FTP.

This document is the user manual provided with the sat-nms DEICE-Controller It contains all necessary information how to install, setup and operate the processor. The user manual is available as a printed document and for online reading on the DEICE-Controller itself as well.

The paragraphs below give a short overview to the contents of this manual.

• Installation : The installation chapter guides through the installation and setup of the sat-nms DEICE-Controller. It describes the mechanical concept of the DEICE- Controller box and the assignment of the connectors. Finally you learn in this chapter how to set the DEICE-Controller's IP address, which is an essential precondition to operate the DEICE-Controller by means of a web browser. This section is available in the printed version only.
• Operation : The sat-nms DEICE-Controller is operated using a standard web browser like the Internet-Explorer on MS Windows based computers. The user interface design is straight forward and clearly structured. Operating the DEICE-Controller is mostly self-explanatory. Nevertheless, the 'Operation' chapter outlines the map of web pages which make up the DEICE-Controller user interface and elaborately describes the meaning of each alterable parameter.
• Remote Control : The sat-nms DEICE-Controller provides a versatile remote control interface. A monitoring & control software may fully operate the DEICE-Controller either through a TCP/IP network connection or through the RS232 interface of the DEICE-Controller. This chapter describes the communication protocol used for remote control and lists all parameters accessible through the remote interface.
• Connector Reference : This chapter provides a comprehensive reference of the sat-nms DEICE-Controller' input / output connectors.
• Specifications : At the end of the document, the specifications applicable to the sat-nms DEICE-Controller are summarized in this chapter.

Support and Assistance

If you need any assistance regarding our power sensor, don't hesitate to contact us. We would be pleased to help you by

  SatService GmbH
  Hardstrasse 9
  78256 Steisslingen
  Germany
  phone +49 7738 99791-10
  fax +49 7738 99791-99
  www.satnms.com