sat-nms PS2 User Manual

Version 3.0.011 -- 2022-02-22 -- © 2020-2022 SatService GmbH

Abstract

The sat-nms PowerSensor manufactured by SatService GmbH is a measurement tool which measures the RF output power of 6, 8 or 14GHz satellite communications signals and provides this information both on a web page via an internal web server or as M&C output information for control systems.

This document describes how to install, setup and operate this antenna controller.

Table Of Contents

• 1 Introduction
• 2 Installation
  • 2.1 Safety Instructions
  • 2.2 Setting the IP Address
  • 2.3 Connecting the Power Sensor
  • 2.4 Mechanical installation
• 3 Operation
  • 3.1 The Web-based User Interface
  • 3.2 Power Reading "State"
  • 3.3 Operational Settings "Settings"
  • 3.4 Setup Parameter "Setup"
• 4 Remote Control
  • 4.1 General command syntax
  • 4.2 TCP/IP remote control interface
  • 4.3 Parameter list
  • 4.4 One line 'read' via Command TCP/IP
  • 4.5 One line 'set' via Command TCP/IP
  • 4.6 UDP level distribution
  • 4.7 SNMP Control
• 5 Theory of Operation
  • 5.1 Linearity and Temperature Compensation
  • 5.2 Frequency Response Calibration
• 6 Specifications